Do You Have a Part Failure Issue?

Please fill out the form below with as much information as possible and help us to help you.

What process are you using?
If you select  other, please
explain in the comments area at
the bottom.

Choose OneBlow Molding-InjectionBlow Molding-ExtrusionInjection MoldingExtrusion-ProfileExtrusion-TubeExtrusion-SheetThermoformingRotomoldingFilm-CastFilm-BlownFilm-BoppFiberStrappingOther

What material are you having a problem with?
If you select  other, please
explain in the comments area at
the bottom.

Choose OneABSAcetalAcetal 25% Glass FillAcrylic (1-8 mf)Acrylic (>20 mf)K-ResinNylon 6Nylon 6 Mineral FilledNylon 6 Glass FilledNylon 6/6Nylon 6/6 Mineral FilledNylon 6/6 Glass FilledPCarb (6-12 mf)PCarb (16-27 mf)PE (<20 mf)PE (>20 mf)PP (Fract -2 mf)PP (4-20 mf)PP (>20 mf)PP Mineral FilledPP Glass FilledPS (1-4 mf)PS (6-10 mf)PS (12-20 mf)PBTPBT Glass FilledPVC RigidSANOther

What type of failure do you have?
If you select  other, please
explain in the comments area at
the bottom.

Choose OneCrackingBroken Tab or RibKnit Line FailureWarpageHeat DistortionAesthetic-Streaks, Blush, Color, GlossFit with Mating PartsWon't Weld or PrintWrong Stiffness or FlexibilityClarity IssuesShort ShotsDeformation Under LoadOther

When does the failure occur?
If you select  other, please
explain in the comments area at
the bottom.

Choose OneDuring MoldingAfter Molding, Before PackagingIn WarehouseAt Customer-Under LoadAt Customer-Not Under LoadIn HeatIn ChemicalsIn UV LightOther

Is the failure always in the same area of the part,
location, or same cavity?

Yes        No    

Are you using a color concentrate?

Yes        No    

What is the color carrier?
If you select  other, please
explain in the comments area at
the bottom.

Choose OnePEPPEVAPSABS or SANNylonOther

Comments

©2000-2006 M. Holland Company. All Rights Reserved. The boxed "H" and "Pride in Plastics" are trademarks of M. Holland Company, and may not be used without written permission. All other logos used on this site are trademarks of their respective companies, and are used with permission.