Do You Need Processing Assistance?

Please fill out the form below with as much information as possible and help us to help you.

   Name
   
   
   

   E-Mail
   
   
   

   Company
   
   
   

   Telephone (optional)
   
   
   

   What process are you using?
   If you select  other, please explain
 in the comments area at the bottom.
   
   
   Choose One
   Blow Molding-Injection
   Blow Molding-Extrusion
   Injection Molding
   Extrusion-Profile
   Extrusion-Tube
   Extrusion-Sheet
   Thermoforming
   Rotomolding
   Film-Cast
   Film-Blown
   Film-Bopp
   Fiber
   Strapping
   Other
   
   Actual Melt Temp
   °F
   Actual Mold Temp
   °F
   
   
   

What material are you having a problem with?
   If you select  other, please explain 
in the comments area at the bottom.
   
   


   Choose One
   ABS
   Acetal
   Acetal 25% Glass Fill
   Acrylic (1-8 mf)
   Acrylic (>20 mf)
   K-Resin®
   Nylon 6
   Nylon 6 Mineral Filled
   Nylon 6 Glass Filled
   Nylon 6/6
   Nylon 6/6 Mineral Filled
   Nylon 6/6 Glass Filled
   PCarb (6-12 mf)
   PCarb (16-27 mf)
   PE (<20 mf)
   PE (>20 mf)
   PP (Fract -2 mf)
   PP (4-20 mf)
   PP (>20 mf)
   PP Mineral Filled
   PP Glass Filled
   PS (1-4 mf)
   PS (6-10 mf)
   PS (12-20 mf)
   PBT
   PBT Glass Filled
   PVC Rigid
   SAN
   Other
   
   
   Other material qualifiers
   Melt Flow
   g/10 minutes
   Density
   g/cc
   IZOD
   foot pounds/inch
   Manufacturer/Grade
   
   
   

   Comments
      
   
   

©2000-2006 M. Holland Company. All Rights Reserved. The boxed "H" and "Pride in Plastics" are trademarks of M. Holland Company, and may not be used without written permission. All other logos used on this site are trademarks of their respective companies, and are used with permission.